🎉 Up to 70% Off Selected ItemsShop Sale
HomeStore

10" 350 W RMS Shallow Subwoofer Powered Enclosure w Remote DS18 PU110A

Product image 1
1 / 9
+4

10" 350 W RMS Shallow Subwoofer Powered Enclosure w Remote DS18 PU110A

  • All-in-One Bass Solution: Built-in Class D monoblock amp with a 10" shallow sub delivers 350W RMS and 700W peak power.
  • Truck-Friendly Design: Slim sealed enclosure fits easily under or behind pickup seats without sacrificing sound quality.
  • Smart Connectivity: High- and low-level inputs, RCA pass-through, and auto turn-on function eliminate the need for a REM wire.
  • Tuned Performance: Precision frequency response from 30–250Hz and a -3dB point at 45Hz for deep, accurate bass.
  • Protected & Easy to Install: Quick-connect terminals, 30A fuse, and built-in protection against heat, overload, and short circuits.


10" 350 W RMS Shallow Subwoofer Powered Enclosure w Remote DS18 PU110A


This Listing Includes



  • (1) PU110A 10" Amplified Shallow Subwoofer Enclosure

  • (1) Wired Remote Bass Control

  • (1) Power and Signal Harness with Quick Connector

  • (1) User Manual


Bass Made Easy!

The PU110A is a complete under-seat powered subwoofer solution designed for pickup trucks and tight spaces. This all-in-one system combines a 10" shallow-mount subwoofer with a built-in digital Class D monoblock amplifier, delivering 350 watts RMS and 700 watts peak power for rich, dynamic bass.


Built for convenience, the PU110A includes both high- and low-level inputs, RCA pass-through, auto turn-on with high-level input (no REM wire needed), and a wired bass knob for remote control. Its sealed 0.48 cu.ft enclosure is precision-tuned to 45Hz (-3dB) for smooth, deep, and responsive low frequencies from 30Hz to 250Hz.


Specifications:



  • Speaker Type / Size: 10" / 261 mm

  • RMS Power Handling: 350W

  • MAX Power Handling: 700W

  • Sensitivity (1W/1M): 85 dB

  • Frequency Response: 30 Hz - 250 Hz

  • Nominal Impedance: 2 Ohms

  • Voice Coil Diameter: 1.5" / 38.6 mm

  • Voice Coil Former Material: Aluminum

  • Winding Material: Copper

  • Cone Material: IPP

  • Surround Material: Rubber

  • Basket Material: Steel

  • Magnet Material: Ferrite (40 Oz)


Amplifier:



  • Class: Digital Class D

  • Configuration: Monoblock Subwoofer

  • Minimum Impedance: 2 Ohms

  • Signal to Noise Ratio: 75 dB

  • Efficiency @ 4 Ohm: 75%

  • THD: 0.30%

  • Low Level Input Range: 0.1 - 0.6V

  • High Level Input: Yes (Auto Turn-On)

  • Selectable X-Over: LPF Fixed (50 - 200 Hz)

  • Bass Boost: 0 - 6 dB @ 50 Hz

  • Phase Selector: 0 - 180

  • Remote Level Control: Included

  • Fuse Size: 30A

  • Power Input Terminal: 8GA Quick Connector

  • Protection Features: Thermal (75C / 167F), Overload, DC Output, Short Circuit, Voltage (<9V/>16V)

  • RCA Pass-Through: Yes


Enclosure Specifications:



  • Type: Sealed Box

  • Internal Volume: 13 L / 0.48 ft

  • Load Configuration: Single 2-Ohm

  • Box Material: 5/8" (15 mm) MDF

  • Finish: Black Carpet

  • -3dB Point: 45 Hz


Dimensions:



  • Height: 12 in

  • Width: 20 in

  • Top Depth: 4.25 in

  • Bottom Depth: 7 in

  • All-in-One Bass Solution: Built-in Class D monoblock amp with a 10" shallow sub delivers 350W RMS and 700W peak power.
  • Truck-Friendly Design: Slim sealed enclosure fits easily under or behind pickup seats without sacrificing sound quality.
  • Smart Connectivity: High- and low-level inputs, RCA pass-through, and auto turn-on function eliminate the need for a REM wire.
  • Tuned Performance: Precision frequency response from 30–250Hz and a -3dB point at 45Hz for deep, accurate bass.
  • Protected & Easy to Install: Quick-connect terminals, 30A fuse, and built-in protection against heat, overload, and short circuits.


10" 350 W RMS Shallow Subwoofer Powered Enclosure w Remote DS18 PU110A


This Listing Includes



  • (1) PU110A 10" Amplified Shallow Subwoofer Enclosure

  • (1) Wired Remote Bass Control

  • (1) Power and Signal Harness with Quick Connector

  • (1) User Manual


Bass Made Easy!

The PU110A is a complete under-seat powered subwoofer solution designed for pickup trucks and tight spaces. This all-in-one system combines a 10" shallow-mount subwoofer with a built-in digital Class D monoblock amplifier, delivering 350 watts RMS and 700 watts peak power for rich, dynamic bass.


Built for convenience, the PU110A includes both high- and low-level inputs, RCA pass-through, auto turn-on with high-level input (no REM wire needed), and a wired bass knob for remote control. Its sealed 0.48 cu.ft enclosure is precision-tuned to 45Hz (-3dB) for smooth, deep, and responsive low frequencies from 30Hz to 250Hz.


Specifications:



  • Speaker Type / Size: 10" / 261 mm

  • RMS Power Handling: 350W

  • MAX Power Handling: 700W

  • Sensitivity (1W/1M): 85 dB

  • Frequency Response: 30 Hz - 250 Hz

  • Nominal Impedance: 2 Ohms

  • Voice Coil Diameter: 1.5" / 38.6 mm

  • Voice Coil Former Material: Aluminum

  • Winding Material: Copper

  • Cone Material: IPP

  • Surround Material: Rubber

  • Basket Material: Steel

  • Magnet Material: Ferrite (40 Oz)


Amplifier:



  • Class: Digital Class D

  • Configuration: Monoblock Subwoofer

  • Minimum Impedance: 2 Ohms

  • Signal to Noise Ratio: 75 dB

  • Efficiency @ 4 Ohm: 75%

  • THD: 0.30%

  • Low Level Input Range: 0.1 - 0.6V

  • High Level Input: Yes (Auto Turn-On)

  • Selectable X-Over: LPF Fixed (50 - 200 Hz)

  • Bass Boost: 0 - 6 dB @ 50 Hz

  • Phase Selector: 0 - 180

  • Remote Level Control: Included

  • Fuse Size: 30A

  • Power Input Terminal: 8GA Quick Connector

  • Protection Features: Thermal (75C / 167F), Overload, DC Output, Short Circuit, Voltage (<9V/>16V)

  • RCA Pass-Through: Yes


Enclosure Specifications:



  • Type: Sealed Box

  • Internal Volume: 13 L / 0.48 ft

  • Load Configuration: Single 2-Ohm

  • Box Material: 5/8" (15 mm) MDF

  • Finish: Black Carpet

  • -3dB Point: 45 Hz


Dimensions:



  • Height: 12 in

  • Width: 20 in

  • Top Depth: 4.25 in

  • Bottom Depth: 7 in

$119.98

Original: $399.95

-70%
10" 350 W RMS Shallow Subwoofer Powered Enclosure w Remote DS18 PU110A

$399.95

$119.98

Description

  • All-in-One Bass Solution: Built-in Class D monoblock amp with a 10" shallow sub delivers 350W RMS and 700W peak power.
  • Truck-Friendly Design: Slim sealed enclosure fits easily under or behind pickup seats without sacrificing sound quality.
  • Smart Connectivity: High- and low-level inputs, RCA pass-through, and auto turn-on function eliminate the need for a REM wire.
  • Tuned Performance: Precision frequency response from 30–250Hz and a -3dB point at 45Hz for deep, accurate bass.
  • Protected & Easy to Install: Quick-connect terminals, 30A fuse, and built-in protection against heat, overload, and short circuits.


10" 350 W RMS Shallow Subwoofer Powered Enclosure w Remote DS18 PU110A


This Listing Includes



  • (1) PU110A 10" Amplified Shallow Subwoofer Enclosure

  • (1) Wired Remote Bass Control

  • (1) Power and Signal Harness with Quick Connector

  • (1) User Manual


Bass Made Easy!

The PU110A is a complete under-seat powered subwoofer solution designed for pickup trucks and tight spaces. This all-in-one system combines a 10" shallow-mount subwoofer with a built-in digital Class D monoblock amplifier, delivering 350 watts RMS and 700 watts peak power for rich, dynamic bass.


Built for convenience, the PU110A includes both high- and low-level inputs, RCA pass-through, auto turn-on with high-level input (no REM wire needed), and a wired bass knob for remote control. Its sealed 0.48 cu.ft enclosure is precision-tuned to 45Hz (-3dB) for smooth, deep, and responsive low frequencies from 30Hz to 250Hz.


Specifications:



  • Speaker Type / Size: 10" / 261 mm

  • RMS Power Handling: 350W

  • MAX Power Handling: 700W

  • Sensitivity (1W/1M): 85 dB

  • Frequency Response: 30 Hz - 250 Hz

  • Nominal Impedance: 2 Ohms

  • Voice Coil Diameter: 1.5" / 38.6 mm

  • Voice Coil Former Material: Aluminum

  • Winding Material: Copper

  • Cone Material: IPP

  • Surround Material: Rubber

  • Basket Material: Steel

  • Magnet Material: Ferrite (40 Oz)


Amplifier:



  • Class: Digital Class D

  • Configuration: Monoblock Subwoofer

  • Minimum Impedance: 2 Ohms

  • Signal to Noise Ratio: 75 dB

  • Efficiency @ 4 Ohm: 75%

  • THD: 0.30%

  • Low Level Input Range: 0.1 - 0.6V

  • High Level Input: Yes (Auto Turn-On)

  • Selectable X-Over: LPF Fixed (50 - 200 Hz)

  • Bass Boost: 0 - 6 dB @ 50 Hz

  • Phase Selector: 0 - 180

  • Remote Level Control: Included

  • Fuse Size: 30A

  • Power Input Terminal: 8GA Quick Connector

  • Protection Features: Thermal (75C / 167F), Overload, DC Output, Short Circuit, Voltage (<9V/>16V)

  • RCA Pass-Through: Yes


Enclosure Specifications:



  • Type: Sealed Box

  • Internal Volume: 13 L / 0.48 ft

  • Load Configuration: Single 2-Ohm

  • Box Material: 5/8" (15 mm) MDF

  • Finish: Black Carpet

  • -3dB Point: 45 Hz


Dimensions:



  • Height: 12 in

  • Width: 20 in

  • Top Depth: 4.25 in

  • Bottom Depth: 7 in