• Dual 10 inch PRO X10M midrange speakers and dual 3.78 inch PRO TWX2 tweeters deliver loud, clear street vocals
• Includes the FRP 1.2K4 full range amplifier for a complete plug and play voceteo setup
• Side ported 15mm MDF enclosure wrapped in black carpet for strong projection and durability
• Comes with a 12 foot OFC 4 conductor Speakon cable for fast, clean connection to the amp
• Wide 80Hz to 20kHz response and a 4 ohm parallel load for powerful, efficient performance

Dual 10 inch 300W RMS Voceteo Loaded Enclosure w Tweeters, Amplifier & Speakon

This Listing Includes:

• (1) Loaded Voceteo Enclosure with Dual 10 inch Midrange Speakers


• (2) 3.78 inch PRO TWX2 Bullet Tweeters


• (1) FRP 1.2K4 Full Range Amplifier


• (1) 12 ft OFC 4 conductor Speakon Cable

The VOC10LD PK brings serious street power in a ready to play voceteo setup. It comes fully loaded with two 10 inch PRO X10M midrange speakers, two PRO TWX2 bullet tweeters, the FRP 1.2K4 amplifier, and a clean 12 foot Speakon cable for fast connection. The enclosure is side ported and made from half inch MDF with a black carpet finish, giving you the strong vocal projection and durability voceteo boxes are known for. With 600 watts of midrange muscle, 240 watts of tweeter power, and a 4 ohm parallel load, this setup hits hard with sharp clarity and high output. The amp gives you full tuning control with HPF, LPF, or full range modes, plus bass boost and wide filter adjustment so you can dial it in your way. If you want loud, effortless, plug and play performance, the VOC10LD PK is the system that brings the show to the street.

Specifications:

• Speaker Configuration: Dual 10 inch Midrange (PRO X10M) + Dual 3.78 inch Tweeters (PRO TWX2)


• Total Impedance: 4 Ohm


• Total RMS Power: 300W


• Total MAX Power: 600W


• Sensitivity: 98 dB


• Frequency Response: 80Hz to 20kHz


• Recommended High Pass: 120Hz

Enclosure Type: Side Ported

• Material: 15mm MDF


• Internal Volume: 18.83L / 0.665 ft3


• Port Tune: 120Hz


• Finish: Black Carpet


• Load Configuration: Parallel


• F3: 120Hz

Amplifier FRP 1.2K4 RMS Power:

• 4 Ohm: 4 x 120W


• 2 Ohm: 4 x 200W


• 1 Ohm: 4 x 300W


• Bridged 4 Ohm: 2 x 350W


• Bridged 2 Ohm: 2 x 500W

Amplifier Audio Specs:

• Frequency Response: 10Hz to 20kHz


• Signal to Noise Ratio: 90 dB


• Efficiency: 97 percent at 4 Ohm


• Input Impedance: 10k


• THD: 0.5 percent


• Low Level Input: 400mV to 6V


• Selectable X Over: HPF, FULL, LPF


• Filter Range: 10Hz to 2kHz


• Bass Boost Frequency: 50Hz


• Bass Boost Range: 0 to 12 dB


• Channel Separation: 50 dB

Speakon Cable:

• Length: 12 ft


• Material: OFC Copper


• Conductors: 4


• Gauge: 14 AWG


• Outer Diameter: 8 mm


• Construction: Stranded Multi Twist


• Shield: PVC Black

Dimensions:

• Height: 26 in


• Width: 11.75 in


• Depth: 6.25 in