• Preloaded with the EXL-X10.4D 10 inch subwoofer for strong, deep bass
• Sealed 0.54 cubic foot enclosure delivers tight and controlled low end
• OEM bolt location design for a clean install on 2015 and newer Slingshot models

Polaris Slingshot Loaded 10" 850W RMS Rear Sealed Subwoofer Enclosure 2015+

This Listing Includes:

• (1) Rear Sealed 10 inch Loaded Subwoofer Enclosure with EXL-X10.4D


• All mounting brackets, hardware, and OFC tinned 6-core wiring

This loaded enclosure gives your Polaris Slingshot the bass it has been missing. It comes preloaded with the EXL-X10.4D 10 inch subwoofer, already wired in parallel to a 2 ohm final load, which lets your amplifier deliver serious power. It installs clean using the factory bolt locations and fits either the driver or passenger side on any 2015 or newer Slingshot. The sealed 0.54 cubic foot enclosure gives you tight, punchy low frequencies that stay controlled even at higher volumes. Built from thick three quarter inch MDF and finished in black bed liner paint, it is tough enough for real road use. With included OFC tinned wiring and RGB-ready connections, you can keep it simple or add lighting for a custom look. If you want deep controlled bass with an easy drop in install, this setup gets it done.

Specifications:

• Speaker Size: 10 in / 254 mm


• Subwoofer Model: EXL-X10.4D


• Final Impedance: 2 ohm


• RMS Power Handling: 850 W


• MAX Power Handling: 1700 W


• Sensitivity: 91 dB


• Frequency Response: 35 to 200 Hz


• Recommended LPF: 120 Hz


• Voice Coil Diameter: 2.5 in / 63.5 mm


• Voice Coil Former: Black aluminum


• Cone: Non pressed paper with glass fiber


• Dust Cap: PPI


• Surround: Foam


• Basket: Aluminum


• Magnet: Ferrite, dual 90 oz


• Wiring: 6 core OFC tinned, SPK plus RGB


• Bracket Included: Yes


• OEM Fitment: Yes, uses factory bolt locations


• Compatible Years: 2015 and up


• Internal Volume: 15.3 L / 0.54 ft


• Enclosure Type: Sealed


• Material: 3/4 in MDF


• Finish: Black bed liner paint


• Load Configuration: Parallel


• F3 Point: 60 Hz

Dimensions:

• Height: 18.7 in / 477 mm


• Width: 15.3 in / 388 mm


• Depth: 14.3 in / 364 mm

Always confirm amplifier power, wiring, and fitment with your specific Slingshot setup before installation.